New Items 4/15/2014

Here are the new picks for the week!

Amazing old windmill blades and tail. All the blades are there but a
couple have slid over some. The tail says Evansville Wis USA but its
faded so a little hard to read. There is a shaft on the back so with a
little work you could mount this so it would spin. It is still very
solid but is needs some straitening of blades as you can see. The
blades are about 8 feet across. The main part of the tail is 46×41.
Over all the tail is 93 long. $160.

Heavy duty vintage industrial galvanized barrel with top cut out. This
would make an amazing table or fill it with ice for cold drinks. It is
33 tall and the opening is about 21 across. It was used for a water
barrel on a farm and has a few small holes in it but is still very
heavy and solid. I think it might have come from the local railroad
but not sure. $50

3 vintage aluminum window awnings. They are 33x15x24 and are in good
shape. $80 for the lot of 3.

Vintage shabby chic white and brass floor lamp. It is 56.75 tall. As
always on old lamps you will need to inspect the wiring yourself as I
am not an expert. $20

Pair of vintage tape dispensers. The orange one needs a pin for part
the tape goes on. A good piece of wire should do the trick. $10 for
the pair.

Sale – Vintage adding machine with cover not shown. $15

vintage tape dispencsers

white and brass floor light 02

white and brass floor light 01

white and brass floor light 03

window awnings

windmill tail

galvanized barrel large

windmill and tail

rc allen adding machine



Comments are closed.